How to dismantle the Lingyue rear bumper: Hot topics and operation guides on the Internet in the past 10 days
Recently, the topic of car modification and repair has become more popular, among which "Lingyue rear bumper disassembly" has become the focus. This article will combine hotspot data from the entire network to provide you with a structured operation guide, with references to recent hot topics.
1. Statistics of hot topics on the entire network in the past 10 days
| Ranking | Topic Category | heat index | Typical keywords |
|---|---|---|---|
| 1 | car modification | 9,850,000 | Surround modification, rear bumper removal, lighting upgrade |
| 2 | New energy vehicles | 8,200,000 | Battery technology, charging piles, battery life |
| 3 | Intelligent driving | 7,500,000 | Autonomous driving, assistance systems, OTA upgrades |
| 4 | used car | 6,300,000 | Value retention rate, testing standards, trading platform |
| 5 | Maintenance | 5,800,000 | Parts replacement, DIY tutorials, maintenance intervals |
2. Detailed steps for disassembly of Lingyue rear bumper
1. Preparation
• Tool list: Phillips screwdriver, 10mm socket wrench, plastic pry bar, lighting equipment
• Safety Tips: Disconnect the negative terminal of the battery and wear protective gloves
• Estimated time: about 1.5 hours for novices, 40 minutes for skilled workers
2. Specific operating procedures
| step | Operation content | Things to note |
|---|---|---|
| 1 | Open the trunk and remove the lining fixing buckle | Use a special pry bar to avoid damage |
| 2 | Remove the 3 10mm bolts at the wheel arch | Pay attention to distinguishing different specifications of screws |
| 3 | Remove the 6 plastic expansion nails at the bottom of the rear bumper | It is recommended to prepare spare buckles |
| 4 | Separate the connection between the two sides and the fender | Maintain a 45 degree angle and pull outwards |
| 5 | Disconnect the fog lamp and reversing radar wiring harness | Press the plug latch first |
3. Solutions to common problems
•Broken buckle:Use AB glue to temporarily fix it. It is recommended to buy the original buckle online (Part number: MB985632)
•The harness cannot be separated:Check the plug locking device, do not pull it by force
•Rear bumper deformation:A hot air gun can be used for local heating and correction, and the temperature should be controlled below 80°C.
3. Extension of relevant hot spots
According to big data analysis, the three major modification directions that car owners are most concerned about recently:
1. Sports surround modification (search volume +35%)
2. LED lighting upgrade (inquiry volume +28%)
3. Lightweight material application (discussion volume +22%)
4. Precautions
• It is recommended to check the condition of the anti-collision beam after disassembly
• Be careful to align all positioning holes when reinstalling
• Special measuring tools are required to adjust the rear bumper gap.
• Modification of the rear bumper requires change registration within 10 days
5. Tool recommendation list
| Tool name | Recommended models | reference price |
|---|---|---|
| Professional pry bar set | Wurth ZS200 | ¥89-120 |
| Anti-static gloves | 3M 1110 | ¥25/pair |
| Magnetic tool tray | NEIKO 03013A | ¥45 |
| LED inspection light | Stanley FATMAX | ¥199 |
Through the above structured guidance, combined with the recent hot topic data reference, you can not only successfully complete the disassembly of the Lingyue rear bumper, but also understand the latest trends in the current field of car modification. It is recommended to bookmark this article for subsequent reference, and follow us for more real-time hot automotive information.
check the details
check the details
en
